Центробежен Чилър - Висока Ефективност 700~2200RT
Центробежен Чилър - Висока Ефективност 700~2200RT - Image 2

Центробежен Чилър – Висока Ефективност 700~2200RT

Висока ефективност 700~2200RT

700RT до 1200RT модели приемат едно ниво на компресия. 1300RT до 2200RT модели приемат две нива на компресия.

Category:

Description

Центробежните Чилъри Мидея са значителна инвестиции за Вашата климатична система. Технологията на топлообмен се използва за повишаване на ефективността и намаляване на обема на хладилния агент до 40% по-малко в сравнение с водния тип.
• R134a фреон
• Тих компресор с уникална система за впръскване на хладилен агент, за да абсорбира звуковата енергия.
• Гъвкав контрол – Интелигентно управление с възможност за лесна интеграция с вашите BAS, LonWorks, BACnet или Modbus системи за комуникация.

Техническа спецификация
Model(LCxxxH / LCxxxH10) 700 750 800 850 900 950 1000 1100 1200
Cooling capacity RT 700 750 800 850 900 950 1000 1100 1200
kW 2461 2637 2813 2989 3164 3340 3516 3868 4219
104kcal/h 212 227 242 257 272 287 302 333 363
Efficiency Running power(1) kW 403 432 460 489 515 543 572 628 683
COP(1) kW/ kW 6.11 6.11 6.12 6.11 6.14 6.15 6.15 6.16 6.18
Running power (2) kW 421 450 481 509 542 572 600 660 720
COP(2) kW/ kW 5.85 5.86 5.85 5.87 5.84 5.84 5.86 5.86 5.86
Compressor Configured power kW 490 490 560 560 630 630 630 695 760
Power supply 380/10000V–3Ph-50Hz 380/10000V–3Ph-50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 423 454 484 514 544 575 605 665 726
Chilled water pressure drop kPa 75 79 80 83 85 80 84 82 83
Pass 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300
Condenser Cooling water flow m3/h 504 540 576 611 648 684 719 791 863
Cooling water pressure drop kPa 84 82 79 83 82 80 85 80 86
Pass 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300
Weight Shipping weight kg 11270 11350 11435 11505 11574 12000 12147 12315 12460
Running weight kg 13209 13350 13564 13712 13839 14532 14773 15108 15376
Dimension Length（A） mm 5020 5020 5020 5020 5020 5045 5045 5045 5045
Width（B） mm 2100 2100 2100 2100 2100 2260 2260 2260 2260
Height（C） mm 2510 2510 2510 2510 2510 2610 2610 2610 2610

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Model(LCxxxH / LCxxxH10) 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
Cooling capacity RT 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
kW 4571 4922 5274 5626 5977 6329 6680 7032 7384 7735
104kcal/h 393 423 454 484 514 544 575 605 635 665
Efficiency Running power(1) kW 740 794 849 912 970 1015 1076 1132 1195 1256
COP(1) kW/ kW 6.18 6.2 6.21 6.17 6.16 6.23 6.21 6.21 6.18 6.16
Running power (2) kW 783 831 889 950 1010 1060 1123 1180 1241 1307
COP(2) kW/ kW 5.84 5.92 5.93 5.92 5.92 5.97 5.95 5.96 5.95 5.92
Compressor Configured power kW 840 930 990 990 1100 1100 1200 1320 1320 1450
Power supply 10000V–3Ph-50Hz 10000V–3Ph-50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 786 847 907 968 1028 1089 1149 1210 1270 1330
Chilled water pressure drop kPa 98 86 83 85 89 91 92 90 91 94
Pass 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400
Condenser Cooling water flow m3/h 929 999 1070 1141 1213 1283 1354 1425 1497 1570
Cooling water pressure drop kPa 92 84 87 88 90 89 93 94 96 96
Pass 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400
Weight Shipping weight kg 12560 19450 20150 20850 21450 23360 23590 23870 24120 24350
Running weight kg 15500 22790 23490 24260 25160 26840 27290 27740 27976 28210
Dimension Length（A） mm 5045 5190 5190 5190 5190 5290 5290 5290 5290 5290
Width（B） mm 2260 2700 2700 2700 2700 3150 3150 3150 3150 3150
Height（C） mm 2610 3010 3010 3010 3010 3180 3180 3180 3180 3180

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Виж повече за този продукт – Тук

Related products

Centrifugal Chiller - High efficiency 700~2200RT
Centrifugal Chiller - High efficiency 700~2200RT - Image 2

Centrifugal Chiller – High efficiency 700~2200RT

High efficiency 700~2200RT

700RT to 1200RT models adopt one compression stage. 1300RT to 2200RT models adopt two compression stage.

Category:

Description

Introduction

Midea Centrifugal Chillers are a significant investment in your building system.The full failing film heat exchange technology also be used to increase the efficiency and decrease the refrigerant charging volume up 40% less compared to the flooded type.
•R134a refrigerant
•Smallest footprint in the industry to optimize equipment room space.
•Unmatched unloading due to patent compressor design with movable diffuser geometry.
•Quiet compressor design with unique refrigerant injection system to absorb sound energy.
•Easy to retrofit with bolt-together construction for easy disassembly and re-assembly at the job site.
•Controls flexibility – Intelligent controls with our open feature allow easy integration with your BAS of choice using LonWorks, BACnet or Modbus communication

Specification
Model(LCxxxH / LCxxxH10) 700 750 800 850 900 950 1000 1100 1200
Cooling capacity RT 700 750 800 850 900 950 1000 1100 1200
kW 2461 2637 2813 2989 3164 3340 3516 3868 4219
104kcal/h 212 227 242 257 272 287 302 333 363
Efficiency Running power(1) kW 403 432 460 489 515 543 572 628 683
COP(1) kW/ kW 6.11 6.11 6.12 6.11 6.14 6.15 6.15 6.16 6.18
Running power (2) kW 421 450 481 509 542 572 600 660 720
COP(2) kW/ kW 5.85 5.86 5.85 5.87 5.84 5.84 5.86 5.86 5.86
Compressor Configured power kW 490 490 560 560 630 630 630 695 760
Power supply 380/10000V–3Ph-50Hz 380/10000V–3Ph-50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 423 454 484 514 544 575 605 665 726
Chilled water pressure drop kPa 75 79 80 83 85 80 84 82 83
Pass 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300
Condenser Cooling water flow m3/h 504 540 576 611 648 684 719 791 863
Cooling water pressure drop kPa 84 82 79 83 82 80 85 80 86
Pass 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300 DN300
Weight Shipping weight kg 11270 11350 11435 11505 11574 12000 12147 12315 12460
Running weight kg 13209 13350 13564 13712 13839 14532 14773 15108 15376
Dimension Length（A） mm 5020 5020 5020 5020 5020 5045 5045 5045 5045
Width（B） mm 2100 2100 2100 2100 2100 2260 2260 2260 2260
Height（C） mm 2510 2510 2510 2510 2510 2610 2610 2610 2610

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Model(LCxxxH / LCxxxH10) 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
Cooling capacity RT 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
kW 4571 4922 5274 5626 5977 6329 6680 7032 7384 7735
104kcal/h 393 423 454 484 514 544 575 605 635 665
Efficiency Running power(1) kW 740 794 849 912 970 1015 1076 1132 1195 1256
COP(1) kW/ kW 6.18 6.2 6.21 6.17 6.16 6.23 6.21 6.21 6.18 6.16
Running power (2) kW 783 831 889 950 1010 1060 1123 1180 1241 1307
COP(2) kW/ kW 5.84 5.92 5.93 5.92 5.92 5.97 5.95 5.96 5.95 5.92
Compressor Configured power kW 840 930 990 990 1100 1100 1200 1320 1320 1450
Power supply 10000V–3Ph-50Hz 10000V–3Ph-50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 786 847 907 968 1028 1089 1149 1210 1270 1330
Chilled water pressure drop kPa 98 86 83 85 89 91 92 90 91 94
Pass 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400
Condenser Cooling water flow m3/h 929 999 1070 1141 1213 1283 1354 1425 1497 1570
Cooling water pressure drop kPa 92 84 87 88 90 89 93 94 96 96
Pass 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter mm DN300 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400 DN400
Weight Shipping weight kg 12560 19450 20150 20850 21450 23360 23590 23870 24120 24350
Running weight kg 15500 22790 23490 24260 25160 26840 27290 27740 27976 28210
Dimension Length（A） mm 5045 5190 5190 5190 5190 5290 5290 5290 5290 5290
Width（B） mm 2260 2700 2700 2700 2700 3150 3150 3150 3150 3150
Height（C） mm 2610 3010 3010 3010 3010 3180 3180 3180 3180 3180

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Read more about the product – Here

Related products