T1 Application – R410A Top-discharge Outdoor Unit

50Hz, T1 Application

T1 application, R410A type, cooling capacity range is from 8HP to 20HP. Floor standing and duct indoor unit. Side-dishcharge type outdoor unit.

Category:

Description

Introduction

The units are completely assembled, internally wired, charged outdoor unit with refrigerant at factory. It is applicable to home, office, hospital, hotel and others public.

Specification
Model MTB-76HWN1 MTB-96HWN1 MTB-120HWN1
Power supply \ 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz
Cooling Capacity Btu/h 76,000 96,000 120,000
W 22,300 28,100 35,000
Input W 7,500 9,600 11,900
EER W/W 2.97 2.93 2.94
Heating Capacity Btu/h 85,300 106,000 129,700
W 25,000 31,100 38,000
Input W 8,300 10,300 12,700
COP W/W 3.01 3.02 2.99
Rated input W 1,300 1,400 2,000
Rated current A 5.2 5.8 9.0
Indoor air flow m3/h 4,500 5,100 6,375
External static pressure Pa 100 100 100
Indoor noise level dB(A) 56 56 63
Refrigerant Type \ R410A R410A R410A
Control \ Capillary Capillary Capillary
Design pressure MPa 4.4/2.6 4.4/2.6 4.4/2.6
Refrigerant pipe Liquid side/ Gas side mm Ф9.52/Ф22 Ф9.52/Ф25 Ф12.7/Ф28.6
Max. refrigerant pipe length m 50 50 50
Max. difference in level m 30 30 30
Connection wire Power wire \ 3×2.5mm2 3×2.5mm2 3×2.5mm2
Signal wire \ 4×1.0mm2 4×1.0mm2 4×1.0mm2
Drain pipe size (OD) mm Ф41 Ф41 Ф41
Controller \ KJR-29C1/BK-E KJR-29C1/BK-E KJR-29C1/BK-E
Operation temperature °C 17~30 17~30 17~30
Indoor unit Dimension (WxHxD) mm 1,451×450×797 1,451×450×797 1,451×450×797
Packing   (WxHxD) mm 1,555×500×875 1,555×500×875 1,555×500×875
Net/Gross weight kg 94/106 96/108 97/109

Notes:

1. The nominal cooling capacity is based on the following conditons.

Indoor temperature: 27°CDB, 19°CWB; Outdoor temperature: 35°CDB, 24°CWB.

2. The nominal heating capacity is based on the following conditons.

Indoor temperature: 20°CDB, 15°CWB; Outdoor temperature: 7°CDB, 6°CWB.

3. The noise is measured in the semi noise suppression lab.

4. Specifications are subject to change without prior notice for product improvement.

Model MHB-76HWN1 MHB-96HWN1 MHA-150HWN1 MHA-192HWN1
Power supply \ 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz
Cooling Capacity Btu/h 76,000 96,000 150,100 192,000
W 22,300 28,100 44,000 56,300
Input W 7,500 9,600 16,300 22,000
EER W/W 2.97 2.93 2.70 2.56
Heating Capacity Btu/h 85,300 106,000 160,300 200,000
W 25,000 31,100 47,000 58,600
Input W 8,300 10,300 15,700 19,300
COP W/W 3.01 3.02 2.99 3.04
Rated input W 1,300 1,400 2,730 4,690
Rated current A 5.2 5.8 12.1 20.9
Indoor air flow m3/h 4,500 5,100 8,500 10,800
External static pressure Pa 196 196 196 196
Indoor noise level dB(A) 56 56 63 65
Refrigerant Type \ R410A R410A R410A R410A
Control \ Capillary Capillary Capillary Capillary
Design pressure MPa 4.4/2.6 4.4/2.6 4.4/2.6 4.4/2.6
Refrigerant pipe Liquid side/ Gas side mm Ф9.52/Ф22 Ф9.52/Ф25 Ф16/Ф32 Ф16/Ф32
Max. refrigerant pipe length m 50 50 50 50
Max. difference in level m 30 30 30 30
Connection wire Power wire \ 3×2.5mm2 3×2.5mm2 3×2.5mm2 3×2.5mm2
Signal wire \ 4×1.0mm2 4×1.0mm2 4×1.0mm2 4×1.0mm2
Drain pipe size (OD) mm Ф41 Ф41 Ф41 Ф41
Controller \ KJR-29C1/BK-E KJR-29C1/BK-E KJR-29C1/BK-E KJR-29C1/BK-E
Operation temperature °C 17~30 17~30 17~30 17~30
Indoor unit Dimension (WxHxD) mm 1,451×450×797 1,451×450×797 1,988×669×906 1,988×669×906
Packing   (WxHxD) mm 1,555×500×875 1,555×500×875 2,095×800×964 2,095×800×964
Net/Gross weight kg 94/106 96/108 208/220 210/230

Notes:

1. The nominal cooling capacity is based on the following conditons.

Indoor temperature: 27°CDB, 19°CWB; Outdoor temperature: 35°CDB, 24°CWB.

2. The nominal heating capacity is based on the following conditons.

Indoor temperature: 20°CDB, 15°CWB; Outdoor temperature: 7°CDB, 6°CWB.

3. The noise is measured in the semi noise suppression lab.

4. Specifications are subject to change without prior notice for product improvement.

Model MFA2-76HRN1 MFA2-96HRN1
Power supply \ 220-240V~, 1Ph, 50Hz 220-240V~, 1Ph, 50Hz
Cooling Capacity Btu/h 76,000 96,000
W 22,300 28,100
Input W 7,500 9,600
EER W/W 2.97 2.93
Heating Capacity Btu/h 85,300 106,000
W 25,000 31,100
Input W 8,300 10,300
COP W/W 3.01 3.02
Rated input W 700 700
Rated current A 3.0 3.0
Indoor air flow m3/h 4,300 4,800
Indoor noise level dB(A) 56 56
Refrigerant Type \ R410A R410A
Control \ Capillary Capillary
Design pressure MPa 4.4/2.6 4.4/2.6
Refrigerant pipe Liquid side/ Gas side mm Ф9.52/Ф22 Ф9.52/Ф25
Max. refrigerant pipe length m 50 50
Max. difference in level (Outdoor upper) m 30 30
Max. difference in level (Outdoor lower) m 25 25
Connection wiring Power wire \ 3×2.5mm2 3×2.5mm2
Signal wirie \ 4×1.0mm2 4×1.0mm2
Drain pipe size (OD) mm Ф41 Ф41
Controller \ R51/E R51/E
Operation temperature °C 17~30 17~30
Indoor unit Dimension (WxHxD) mm 1,200×1,860×518 1,200×1,860×518
Packing   (WxHxD) mm 1,362×2,050×582 1,362×2,050×582
Net/Gross weight kg 130/145 140/154

Notes:

1. The nominal cooling capacity is based on the following conditons.

Indoor temperature: 27°CDB, 19°CWB; Outdoor temperature: 35°CDB, 24°CWB.

2. The nominal heating capacity is based on the following conditons.

Indoor temperature: 20°CDB, 15°CWB; Outdoor temperature: 7°CDB, 6°CWB.

3. The noise is measured in the semi noise suppression lab.

4. Specifications are subject to change without prior notice for product improvement.

Model MOV-76HN1-R MOV-96HN1-R MOV-120HN1-R MOV-150HN1-R MOV-192HN1-R
Power supply \ 380-415V~, 3Ph, 50Hz
Ambient Temp. in cooling mode °C 17~46 17~46 17~46 17~46 17~46
Ambient Temp. in heating mode °C -7~24 -7~24 -7~24 -7~24 -7~24
Rated input W 11,700 14,400 17,300 26,900 32,200
Rated current A 19.3 23.7 28.6 47.9 53.8
Outdoor noise level dB(A) 68 68 69 70 73
Refrigerant Type \ R410A R410A R410A R410A R410A
Charge g 5,400 5,500 7,500 10,000 11,800
Design pressure MPa 4.4/2.6 4.4/2.6 4.4/2.6 4.4/2.6 4.4/2.6
Refrigerant pipe Liquid side/ Gas side mm Ф9.52/Ф22 Ф9.52/Ф25 Ф12.7/Ф28.6 Ф16/Ф32 Ф16/Ф32
Max. pipe length m 50 50 50 50 50
Max. difference in level (OD up) m 25 25 25 25 25
Max. difference in level (OD down) m 30 30 30 30 30
Connection wire Power wire mm2 5×6.0mm2 5×10.0mm2 5×10.0mm2 5×15.0mm2 5×15.0mm2
Signal wire mm2 4×1.0mm2 4×1.0mm2 4×1.0mm2 4×1.0mm2 4×1.0mm2
Outdoor unit Dimension (W×H×D) mm 1,260×908×700 1,260×908×700 1,260×908×700 1,250×1,615×765 1,390×1,615×765
Packing  (W×H×D) mm 1,320×1,060×730 1,320×1,060×730 1,320×1,060×730 1,305×1,790×820 1,455×1,790×830
Net/ Gross weight kg 174/193 187/204 201/217 288/308 320/336

Notes:

1. The nominal cooling capacity is based on the following conditons.

Indoor temperature: 27°CDB, 19°CWB; Outdoor temperature: 35°CDB, 24°CWB.

2. The nominal heating capacity is based on the following conditons.

Indoor temperature: 20°CDB, 15°CWB; Outdoor temperature: 7°CDB, 6°CWB.

3. The noise is measured in the semi noise suppression lab.

4. Specifications are subject to change without prior notice for product improvement.

Read more about the product – Here

Features

High Efficient Design, MEPs Approval
No complex internal suction and discharge valves for quieter operation and higher reliability. With thermal protectors that prevent motor overheating, loss of phase and low refrigerant or oil charge. Compact size and lightweight, simple design.
High efficiency scroll compressor

High performance heat exchanger
The heat exchanger fins are coated with anticorrosive and hydrophilic layers. These special coated layers serve as protection against corrosion from air, water and other corrosive agents. Inner-thread condensing pipe enhance heat exchange efficiency.
img src=”http://midea-bg.net/wp-content/uploads/2016/01/High-performance-heat-exchanger-2.png” alt=”High performance heat exchanger” width=”220″ height=”300″ class=”alignnone size-full wp-image-15575″ />

High reliable
Multi measurements to ensure units operate normally and reliably.
Self-diagnosis function
Phase fault protection
System current protection
High/low pressure switch protection
High reliable

Convenient installation (Duct Indoor Unit)
Hidden in the ceiling, unit installation is not hindered by the location of lighting fixtures or room structure.
Air inlet/outlet flange are standard for easy duct connection.
Easy maintenance through the inspection port.
Convenient installation (Duct Indoor Unit)

Flexible duct design for different room styles
Flexible duct design for different room styles

Strong wind, long distance air supply (Floor-standing Indoor Unit)
Strong wind, long distance air supply (Floor-standing Indoor Unit)

Download

File Name Date File Size Click to download
Midea R410A T1 Top-discharge Split Type Series Technical Manual 50Hz 20150612 9.52MB download