Центробежен Чилър – Стандартна Ефективност 500~2200RT

Стандартна ефективност 500~2200RT

500RT до 1200RT модели приемат едно ниво на компресия. Модели от 1300RT 2200RT приемат две нива на компресия.

Category:

Описание

Центробежните Чилъри Мидея са значителна инвестиция за Вашата климатична система. Технологията на топлообмен се използва за повишаване на ефективността и намаляване на обема на хладилния агент до 40% по-малко в сравнение с водния тип.
• R134a фреон
• Тих компресор с уникална система за впръскване на хладилен агент, за да абсорбира звуковата енергия.

Техническа спецификация
Model(LCxxxM, LCxxxM10) 450 500 550 600 650 700 750 800 850 900
Cooling RT 450 500 550 600 650 700 750 800 850 900
capacity kW 1582 1758 1934 2110 2285 2461 2637 2813 2989 3164
104kcal/h 136 151 166 181 197 212 227 242 257 272
Efficiency Running power (1) kW 287 303 333 364 394 424 455 484 515 544
COP(1)  kW/ kW 5.51 5.8 5.81 5.79 5.8 5.81 5.79 5.81 5.8 5.82
Running power (2) kW 293 313 345 376 406 437 470 500 532 563
COP(2) kW/ kW 5.4 5.62 5.61 5.61 5.63 5.63 5.61 5.63 5.62 5.62
Compressor Configured power kW 385 385 385 445 490 490 560 560 630 630
Power supply 380/10000V~3Ph~50Hz 380/10000V~3Ph~50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 272 302 333 363 393 423 454 484 514 544
Chilled water pressure drop kPa 64 63 62 65 72 70 74 75 78 80
Pass / 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter / DN200 DN250 DN250 DN250 DN300 DN300 DN300 DN300 DN300 DN300
Condenser Cooling water flow m3/h 327 362 397 433 466 501 537 575 611 645
Cooling water pressure drop kPa 62 65 63 68 71 76 76 76 77 77
Pass / 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter / DN200 DN250 DN250 DN250 DN300 DN300 DN300 DN300 DN300 DN300
Weight Shipping weight kg 7510 7650 7960 8146 10595 10670 10750 10835 10905 10974
Running weight kg 8702 8958 9390 9641 12382 12559 12700 12914 13062 13189
Dimension Length（A） mm 4650 4650 4650 4650 5020 5020 5020 5020 5020 5020
Width（B） mm 1850 1850 1850 1850 2100 2100 2100 2100 2100 2100
Height（C） mm 2054 2054 2054 2054 2510 2510 2510 2510 2510 2510

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Model(LCxxxM, LCxxxM10) 950 1000 1100 1200 1300 1400 1500 1600 1700
Cooling RT 950 1000 1100 1200 1300 1400 1500 1600 1700
capacity kW 3340 3516 3868 4219 4571 4922 5274 5626 5977
104kcal/h 287 302 333 363 393 423 454 484 514
Efficiency Running power (1) kW 575 602 656 724 779 834 892 957 1016
COP(1)  kW/ kW 5.81 5.84 5.9 5.83 5.87 5.9 5.91 5.88 5.88
Running power (2) kW 595 623 679 750 803 862 918 980 1054
COP(2) kW/ kW 5.61 5.64 5.7 5.63 5.69 5.71 5.75 5.74 5.67
Compressor Configured power kW 695 695 760 840 840 930 990 1100 1100
Power supply 380/10000V~3Ph~50Hz 10000V~3Ph~50Hz
Motor cooled by Refrigerant Refrigerant
Evaporator Chilled water flow m3/h 575 605 665 726 786 847 907 968 1028
Chilled water pressure drop kPa 82 85 83 84 85 84 81 83 87
Pass / 2 2
Chilled water inlet/outlet temperature ℃ 12/7 12/7
Connection type Flange Flange
Water pipe inlet/outlet diameter / DN300 DN300 DN300 DN300 DN350 DN350 DN400 DN400 DN400
Condenser Cooling water flow m3/h 680 719 789 862 932 1004 1075 1147 1218
Cooling water pressure drop kPa 76 72 76 77 83 84 87 88 90
Pass / 2 2
Cooling water inlet/outlet temperature ℃ 30/35 30/35
Connection type Flange Flange
Water pipe inlet/outlet diameter / DN300 DN300 DN300 DN300 DN350 DN350 DN400 DN400 DN400
Weight Shipping weight kg 11400 11547 11715 11860 18910 19400 20100 20800 21400
Running weight kg 13882 14123 14458 14726 22490 22730 23430 24200 25100
Dimension Length（A） mm 5045 5045 5045 5045 5190 5190 5190 5190 5190
Width（B） mm 2300 2300 2300 2300 2700 2700 2700 2700 2700
Height（C） mm 2610 2610 2610 2610 3010 3010 3010 3010 3010

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Model(LCxxxM, LCxxxM10) 1800 1900 2000 2100 2200
Cooling RT 1800 1900 2000 2100 2200
capacity kW 6329 6680 7032 7384 7735
104kcal/h 544 575 605 635 665
Efficiency Running power (1) kW 1057 1127 1185 1252 1315
COP(1)  kW/ kW 5.99 5.93 5.93 5.9 5.88
Running power (2) kW 1095 1168 1229 1298 1364
COP(2) kW/ kW 5.78 5.72 5.72 5.69 5.67
Compressor Configured power kW 1100 1200 1320 1320 1450
Power supply 10000V~3Ph~50Hz
Motor cooled by Refrigerant
Evaporator Chilled water flow m3/h 1089 1149 1210 1270 1331
Chilled water pressure drop kPa 89 90 88 89 90
Pass / 2
Chilled water inlet/outlet temperature ℃ 12/7
Connection type Flange
Water pipe inlet/outlet diameter / DN400 DN400 DN400 DN400 DN400
Condenser Cooling water flow m3/h 1289 1360 1431 1504 1576
Cooling water pressure drop kPa 89 92 94 95 96
Pass / 2
Cooling water inlet/outlet temperature ℃ 30/35
Connection type Flange
Water pipe inlet/outlet diameter / DN400 DN400 DN400 DN400 DN400
Weight Shipping weight kg 23310 23540 23820 24070 24300
Running weight kg 26780 27230 27680 27916 28150
Dimension Length（A） mm 5290 5290 5290 5290 5290
Width（B） mm 3150 3150 3150 3150 3150
Height（C） mm 3180 3180 3180 3180 3180

 

Note:

Nominal cooling capacities are based on the following conditions:

Chilled water inlet/outlet temp.(1): 12℃/7℃; Cooling water inlet/outlet temperature 30/35℃.

Chilled water inlet/outlet temp.(2): 12℃/7℃; Cooling water inlet/outlet temperature 32/37℃.

The design fouling factor for both evaporator and condenser are 0.086 m2. ℃/kW, otherwise can be customized.

The design max. working pressure for both evaporator and condenser are 1.0MPa, higher pressure demand can be customized.

Виж повече за този продукт – Тук

Характеристика

Патентован дизайн на компресора
Patent compressor design
Patent compressor design2

Pre-swirling Guide Vane Technology
Компресорът е оборудван с въздушна перка, която произвежда завихряне при различни условия на натоварване, а оттам до увеличаване на диапазона на работа и повишаване на ефективността на частично натоварване.
Pre-swirling Guide Vane Technology
Pre-swirling Guide Vane Technology

Кондензатор
Високо ефективния топлообменник и оптимизирана структура подобрява топлинната производителност.
Condenser

Prospective-Control Logic
Микрокомпютърна система за контрол има такива характеристики като: тенденциални прогнози, самодиагностика, самостоятелно регулиране и защита на безопасността. Има способност да прогнозира реална промяна на товара според целевите стойности и предишното ниво на натоварване и предотвратяване на загубата на енергия.
Prospective-Control Logic
Prospective-Control Logic3
Prospective-Control Logic2

Инструкции

File Name Date File Size Click to download
Standard+high efficiency centrifugal chiller 2015.06 download

Related products